Speedi-BILT®

Product Specs

Speedi-BILT Specifications

Unless customized, Speedi-Bilt® shelving consists of nothing more than essential posts, beams, and shelves. Each beam boasts rivets that engage the posts' keyhole slots, forming a structurally independent unit that requires no bolts, nuts, or bracing. Your only major decision involves selecting the shelving design from a host of options. Accessories are available to tailor the unit such that it meets your unique needs.

Stock nominal unit sizes range from 12 to 96" wide and deep. Available heights include everything up to, and even in excess of, 15'. Actual width and depth is calculated by adding 1/2" to the nominal measurements.

Component Parts

ANGLE POST - to be 14 Ga. steel 1-1/2" by 1-1/2". Each leg to be punched with keyhole slots on 1-1/2" vertical centers.

SUPER DUTY ANGLE POST - to be 14 Ga. steel 1-7/8" by 1-7/8". Each leg to be punched with keyhole slots on 1-1/2" vertical centers.

TEE POST - to be 14 Ga. steel formed into a "T" shape 3" by 1-1/2". Front flanges to be 1-3/8" with 1/4" space between flanges. Side flanges to be 1-1/2". All flanges to be punched with keyhole slots on 1-1/2" vertical centers.

SINGLE RIVET BEAM - to be       Ga. steel. Front vertical face extends to 31/32" with 1" return flange. Return flange to be mitered at each end to provide clearance between left-to-right and front-to-back beams. Return flange provides support for shelf surface. Face flange to have one rivet at each end for attaching to keyhole slots in the posts.

DOUBLE RIVET BEAMto be      Ga. steel. Front vertical face extends to 2-11/16" with 1-3/32" return flange. Top flange to be mitered at each end to provide clearance between left-to-right and front-to-back beams. Return flange provides support for shelf surface. Face flange to have two rivets at each end on 1-1/2" centers for attaching to keyhole slots in the posts. Beams that are 36 through 96" to have two holes at midpoint for attaching support ties. Beams 60 through 96" to have additional pairs of holes at the quarter points for attaching support ties.

DOUBLE RIVET CHANNEL BEAMS - to be      Ga. steel. Front vertical face extends to 2-11/16" with 1-3/32" return flange. Top and bottom flanges to be mitered at each end to provide clearance between left-to-right and front-to-back beams. Return flange provides support for shelf surface. Face flange to have two rivets at each end on 1-1/2" centers for attaching to keyhole slots in the posts. Beams that are 36 through 96" to have two holes at midpoint for attaching support ties. Beams 60 through 96" to have additional pairs of holes at the quarter points for attaching support ties.

Accessories

STEEL SHELF SURFACE - to be 18 to 22 Ga. steel formed into box shelf design 1-1/8" high with return flanges on all four corners. Shelves to be assembled individually without hardware or bolted together in multiples (of?) when particle board is not acceptable.

TIRE SUPPORT BEAM - to be       Ga. steel. Front vertical face extends to 2-11/16" with 1-3/32" return flange. Top flange to be mitered at each end to provide clearance between left-to-right and front-to-back beams. Top flange to be "over-broke" and provide a surface to support tires. Return flange provides support for shelf surface. Face flange to have two rivets at each end on 1-1/2" centers for attaching to keyhole slots in the posts. Beams that are 36 through 96" to have two holes at midpoint for attaching support ties. Beams 60 through 96" to have additional pairs of holes at the quarter points for attaching support ties.

SUPPORT TIES - to be 14 Ga. steel formed into an angle. To be punched with two holes for attaching to double rivet beams or channels using bolts and nuts. Top and bottom flanges to be notched so as to fit flush with top of beams.

WALL TIE - to be 14 Ga. steel formed into an angle. To be punched with two holes for attaching to double rivet beams or channels using bolts and nuts. Top and bottom flanges to be notched so as to fit flush with top of beams. One end flange to have two rivets for attaching to keyhole slots in the posts.

DOUBLE TIE - to be 14 Ga. steel formed into an angle. To be punched with two holes for attaching to double rivet beams or channels using bolts and nuts. Top and bottom flanges to be notched so as to fit flush with top of beams. Both end flanges to have two rivets each for attaching to keyhole slots in the posts.

TIE PLATE - to be 14 Ga. steel plate spacing the posts 1/4" apart. Plate to have four rivets for attaching to keyhole slots of adjoining angle post.

FOOT PLATE - to be 14 Ga. steel with two keyholes to align with and attach to the keyholes in the posts using bolts and nuts. Plate base to have two 9/16" holes for floor anchors.

Mezzanine Components

DECK SUPPORT CHANNEL - to be 11 Ga. steel with 3" face flange and 2" top flange to support mezzanine floor grating. Face flange ends to have two rivets for attaching to keyhole slots in the post.

AISLE SPACERS - to be 14 Ga. steel formed into an angle. To be punched with two holes for attaching to double rivet beams or channels using bolts and nuts. Top and bottom flanges to be notched so as to fit flush with top of beams. Both end flanges to have two rivets each for attaching to keyhole slots in the posts.

CROSS AISLE SUPPORT - to be 11 Ga. steel formed into "U" shaped channel used to support mezzanine catwalk floor grating. Both ends to be flanged and have two rivets each for attaching to keyhole slots in the post.

Other

FINISH - All non-hardware parts are powder-coated. Bolts, nuts, and other hardware items (e.g. shelf clips, foot plates) are zinc plated.

CLICK HERE or below for the Speedi-BILT product specifications.